wall putty

Causes and solutions of blistering putty(2)

By |2023-02-13T06:12:25+00:00June 24th, 2022|Product Applications|

Causes and solutions of blistering putty(1) 2. Solutions for blistered putty 1. For large blistered putty surfaces, use a spatula to directly crush the small bubbles. Then re-scrape the blistered surface with a suitable putty. 2. For particularly rough walls, generally choose a coarse putty for the base material if possible. 3. Clean up the

Notes on the use of cellulose ethers in putty powder

By |2023-02-14T05:59:51+00:00June 16th, 2022|Industry News, Product Applications|

Notes on the use of cellulose ethers in putty powder. Cellulose is commonly used in the fields of insulation mortar masterbatch, putty powder, asphalt roads and plaster products. It is used to improve and enhance the characteristics of building materials and to enhance the stability of production and construction suitability. Today, we would like to

Causes and solutions of Wall Putty Blister

By |2022-05-07T07:05:07+00:00May 7th, 2022|Product Applications|

The main reason for the blistering of Wall putty powder is the problem of the wall. If the wall is pitted, uneven, and has small pits. It must be blistered. And the amount of blistering depends on the shear force of hydroxypropyl methylcellulose. The higher the viscosity of cellulose, the more bubbles, and vice versa.

HPMC in wall putty/skim coat

By |2022-05-07T06:51:02+00:00May 7th, 2022|Product Applications|

This article will introduce you to the application of HPMC in wall putty/skim coat. At present, in most cities in the world, water-resistant, scrub-resistant and environmentally friendly putty has been basically valued by people. A few years ago, because of putty made of polyvinyl alcohol and formaldehyde acetal reaction system gives off formaldehyde gas which

Go to Top