1.Brief Introduction

HPMC-Hydroxypropyl Methyl Cellulose and Methyl Hydroxyethyl Cellulose and non-ionic cellulose ether made by natural high polymer cellulose as raw material and series of chemical processing. They are odorless, tasteless and non-toxic white powder, which can be dissolved in cold water to form a transparent viscous solution. Processing thickening, binding, dispersing, emulsifying, film, coating, suspending, absorbing, gelling, surface activity, water maintaining and protective colloid properties.

2.Parameter:

ItemsTechnical dataUnits
AppearanceWhite or off-white powder
Methoxy19%~24%%
Hydroxypropoxy4%~12%%
Viscosity range (2%,Brookfield)300-65000mPa.S
Viscosity range (1%, NDJ)300-200000mPa.S
Moisture≤5%
PH Value7-9
Gel temperature60-75%
Packing Density250 – 360g/l

3.HPMC for Tile Adhesive Description:

The tile adhesive is physically mixed by cement, sand and accessories, and it is formulated differently in different countries or regions. There are various types of tiles and substrates, also the environment and trowel methods differ from one place to another , thus the performance requirements of cement tile adhesive are different.
Landcel has a wide range of products to meet the performance requirements of tile adhesive in different applications, as shown in the following advantages:
– Greatly improve the water retention capacity, inhibit the large loss of moisture to the highly water-absorbing ceramic tile and substrate, so that there is enough water for hardening condition of cement, the bond strength is increased and the slip resistance of mortar is further improved;
– Excellent open time and adjustable time for workers to adjust the mistakes of placing wrong ceramic;
– No matter be thickly sticked or thin sticked, it can develop a good bond strength, reduce shrinkage rate, and it won’t cause ceramic tile craze and fall off by stress;
– The mortar is endowed with better plasticity and flexibility, which makes construction easier and work more efficiently;

HPMC for Tile Adhesive Typical applications

– High quality flexible tile adhesive
– Adhesive for floor and wall tile
– Used for various glass and non-glass ceramic tile adhesive
– Suitable for mineral substrate and non-mineral substrate

HPMC for Tile Adhesive Tile Grouts

Landcel HPMC can be used in different materials such as ceramic tile, mosaic, marble and other materials.

– Jointing of floor tiles and wall tiles;
– Cement-based joint filler
– Jointing between porcelain polished tiles or Non-porcelain polished tiles
– Indoor and outdoor usage

HPMC for Tile Adhesive Advantages:

– Improve the adhesion between ceramic tile sealant and ceramic tile edge;
– Improve the flexibility and deformation ability of caulking agent;
– Give caulking agent excellent hydrophobicity to improve water resistance and stain resistance;
– Salt-petering reduction

HPMC for Tile Adhesive

4. Models recommend

Product gradeVisco.
NDJ
Visco.
Brookfield
TILE ADHESIVETILE GROUT
EconomicPremier
General grade
MH 75T75,00035,000●●●●●
MH 150T150,00055,000●●●●
MH 200T200,00065,000●●●●
Modified grade
LD1210125,00050,000●●●
LD1516100,00045,000●●●
LD18228,0008,000●●●
S2118175,00060,000●●
M3110175,00060,000●●