Gypsum-based self-leveling interface agent is an interface agent specially used for gypsum-based self-leveling construction and has multiple functions.
First, it can significantly improve the adhesion between gypsum-based self-leveling and the base layer. Make the self-leveling layer stronger and the base layer stronger, thereby reducing the risk of cracking.
In addition, interface agents can improve the performance of the base layer. Including improving the smoothness, water absorption, and impermeability of the base layer. Create a good base environment for self-leveling construction.
During the construction process, interface agents can increase the fluidity of self-leveling. This makes it easier to flow and level during the construction process, thereby improving construction efficiency. At the same time, interface agents are usually made of environmentally friendly, pollution-free raw materials, comply with relevant regulations on building materials, and are safe to use.
In addition, it also has certain water resistance. Which can resist moisture erosion and improve the durability of the self-leveling layer.
In terms of construction steps, the gypsum-based self-leveling interface agent needs to clean the base layer first to ensure that the ground is clean. Then add water and stir to dilute the paint and stir evenly. Then use rollers, brushes and other tools to evenly apply it to the base surface, or spray evenly with a machine to ensure there are no omissions. After it is allowed to dry naturally, self-leveling construction can be carried out.
/

However, there are some things to note when using gypsum-based self-leveling interface agents.

For example, interface agents should be stored in a cool place away from high temperatures and direct sunlight.
Construction should be avoided under conditions where the ambient temperature is below 5°C and the relative air humidity is above 80%.
After painting, wait until it is fully dry and the film is well formed before proceeding with self-leveling construction.
If the construction cannot be carried out in time, attention should be paid to protecting the finished product to prevent damage to the film-formed interface agent.